Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
John
 
Posts: n/a
Default Sylvania CK3000 Test Rig Question

I recently acquired a Sylvania CK3000 (chek-a-color) test rig (circa
1980, used in tv service shops to sub for a color CRT/yoke during
testing/alignment) along with a bag of cables, plugs, extensions, &
adaptors plus a sales brochure, no users' manual. The small sales
brochure claims that the unit supports the old 21" round-tube color
chassis' and the adaptors for hookup of the old 70-degree color tubes
and yokes are present along with several YP (yoke program) and CL
(convergence load) adaptors. I've determined approximately how to
utilize the unit in servicing vintage color sets for collectors, but
still haven't determined which YP and CL adaptors need to be used with
the various chassis designs such as the old RCA CTC-7 thru CTC-16,
Zenith 29JC20 thru 25NC33, Sylvania D-01, D-02, old Philco's and the
Admiral 26UH6, etc. Anyone have a User's Manual for the CK3000?
Anyone have a list of supported chassis' and which adaptors to use for
each make/model?
  #2   Report Post  
Ray
 
Posts: n/a
Default

I recently acquired a Sylvania CK3000 (chek-a-color) test rig (circa
1980, used in tv service shops to sub for a color CRT/yoke during
testing/alignment) along with a bag of cables, plugs, extensions, &
adaptors plus a sales brochure, no users' manual. The small sales
brochure claims that the unit supports the old 21" round-tube color
chassis' and the adaptors for hookup of the old 70-degree color tubes
and yokes are present along with several YP (yoke program) and CL
(convergence load) adaptors. I've determined approximately how to
utilize the unit in servicing vintage color sets for collectors, but
still haven't determined which YP and CL adaptors need to be used with
the various chassis designs such as the old RCA CTC-7 thru CTC-16,
Zenith 29JC20 thru 25NC33, Sylvania D-01, D-02, old Philco's and the
Admiral 26UH6, etc. Anyone have a User's Manual for the CK3000?
Anyone have a list of supported chassis' and which adaptors to use for
each make/model?


John,
I built my own jig way back when and I still have it. I remember I had
to buy a matching transformer, made my own cables, and I'm sure I have some
old setup manuals. I'll get back to you this weekend if it looks like what I
have will answer your questions. That stuff is home and I'm not.

Ray (pack rat since birth).
--

My return addy is spamblocked. To reply, remove the zeroes.
  #3   Report Post  
Ray
 
Posts: n/a
Default

I recently acquired a Sylvania CK3000 (chek-a-color) test rig
no users' manual.


John,
I sent an email but no response. I scanned my 1982 setup manual and put it
up at http://staff.washington.edu/rrcc/uwweb/CK3000

Ray

--

My return addy is spamblocked. To reply, remove the zeroes.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question....Sylvania!! Rono Electronics Repair 0 August 17th 05 03:22 PM
Repair Service for Test & Measurement Equipment luaurence Electronics Repair 0 September 12th 04 08:01 AM
Simple question regarding Ceiling tiles and sound? lbbs Home Repair 6 March 26th 04 01:23 AM
Ferrolio Optima 901 relief valve test knob Ted UK diy 3 January 8th 04 03:12 AM
Another toolkit question Andrew McKay UK diy 32 July 15th 03 12:15 AM


All times are GMT +1. The time now is 05:46 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"