Max Rating:11V-2.8A
S/N:002J1A3773
R043D
FCC ID:EJH3026E


I worked on my laptop by connecting its AC Adapter(Model3026A-ADA)
through wall outlet.
AC Input:100-240V,1.0A,50/60Hz
DC Output:11V-2.8A
Laptop failed to open,does not shows Power light on its front
cover.After minutes of connection to Power Socket,I touched cord from
Adapter to Laptop which became hot,I feel smell of burning not sure
from where exactl.I checked underside of Laptop where Power Cord
connected was also warm.
On Power Cord Cable(showing 10 Wires) to Laptop following is written:
AWM E101344 STYLE 2464 VW-1 300V 80 Centigrade Space Shuttle
Its wonder why it failed to make my laptop working as reading above
shows that it can withstand 80 Celcius.
Any help/suggestion pls.
Will I open the adapter to check it's Protection fuse T1A/250V?
In an effort to take out fuse,I have totally broken fuse glass,it was
still intact with it's right/left terminals fixed in a metal cap with
strong soldered legs.I have taken these remains of fuse legs to see If
I can buy the same and solder it on it's previous pads.
Can I run laptop without fixing fuse for Adapter?

"Thaqalain" wrote in message
oups.com...
Max Rating:11V-2.8A
S/N:002J1A3773
R043D
FCC ID:EJH3026E


I worked on my laptop by connecting its AC Adapter(Model3026A-ADA)
through wall outlet.
AC Input:100-240V,1.0A,50/60Hz
DC Output:11V-2.8A
Laptop failed to open,does not shows Power light on its front
cover.After minutes of connection to Power Socket,I touched cord from
Adapter to Laptop which became hot,I feel smell of burning not sure
from where exactl.I checked underside of Laptop where Power Cord
connected was also warm.
On Power Cord Cable(showing 10 Wires) to Laptop following is written:
AWM E101344 STYLE 2464 VW-1 300V 80 Centigrade Space Shuttle
Its wonder why it failed to make my laptop working as reading above
shows that it can withstand 80 Celcius.
Any help/suggestion pls.
Will I open the adapter to check it's Protection fuse T1A/250V?
In an effort to take out fuse,I have totally broken fuse glass,it was
still intact with it's right/left terminals fixed in a metal cap with
strong soldered legs.I have taken these remains of fuse legs to see If
I can buy the same and solder it on it's previous pads.
Can I run laptop without fixing fuse for Adapter?

Sounds like the initial problem is in the laptop, not the power adapter.
The adapter will not function without a correct fuse.

JMK

Before I read your post , I have broken fuse to take it out as it was
strongly soldered to legs of it's protective capping.I don't know why
chinese designed it like this.For monitors/Tvs we can easily remove it
and replace it.But for this adapter,it can only be removed in pieces.

Can I run adapter and Laptop without fuse?As I don't think so fuse with
another protective capping with legs for soldering is available in
Market.

Thaqalain wrote:

Can I run adapter and Laptop without fuse?As I don't think so fuse with
another protective capping with legs for soldering is available in
Market.


No, you cannot run the adapter without the fuse. It will not function.
It is difficult to solder wires to a fuse. Look for a fuse OF THE
SAME RATING of the "pigtail" type. These have the wires already
soldered to the end caps. Then remove the board from the adapter,
unsolder the broken fuse and solder in the new fuse.

Damage is being already committed,I can do only solder from newly
purchased gun,not sure how to unsolder if situation require in future.
An

Thaqalain wrote:
Before I read your post , I have broken fuse to take it out as it was
strongly soldered to legs of it's protective capping.I don't know why
chinese designed it like this.For monitors/Tvs we can easily remove it
and replace it.But for this adapter,it can only be removed in pieces.

It can be removed in one piece by unsoldering it.