Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]() |
|||
|
|||
![]() How do you adjust it? There are no visible tracking dials yet some of my tapes are scrambled without a tracking adjustment, which when played on another machine with tracking adjustment, play fine. Thanks... |
#2
![]() |
|||
|
|||
![]() "Tony Cianfaglione" wrote in message ... How do you adjust it? There are no visible tracking dials yet some of my tapes are scrambled without a tracking adjustment, which when played on another machine with tracking adjustment, play fine. Thanks... I think the tracking controls on the 319 were on the remote... Mark Z. |
#3
![]() |
|||
|
|||
![]() On Wed, 17 Aug 2005, Mark D. Zacharias wrote: How do you adjust it? There are no visible tracking dials yet some of my tapes are scrambled without a tracking adjustment, which when played on another machine with tracking adjustment, play fine. I think the tracking controls on the 319 were on the remote... I was afraid of that. :-( I picked it up at a thrift store without a remote. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Tracking down electrical faults | UK diy | |||
Tracking on Sont CCD V3 | Electronics Repair | |||
Wire feed tracking in mig's/Hobart & Miller | Metalworking | |||
Poor tracking | Electronics Repair | |||
Hitachi Hi8 camcorder tracking adjustment | Electronics Repair |