Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
mikelim
 
Posts: n/a
Default help on cd pickup

Hi,


Wonder if you can kindly offer me some information on CD pickup with
regards to:


1. pinout


2. the structure, especially optics ( I have observed that the pickup
structure differs from one model to another, is it possible for you
to list or provide source of optics information of the cd pickup along
with the product model, etc).


Thank you very much for your aid rendered and time. I have read
through sam laser faq but it is too generalised.


Yours sincerely,
Yoong Ping, Lim

  #2   Report Post  
Sam Goldwasser
 
Posts: n/a
Default

"mikelim" writes:

Hi,


Wonder if you can kindly offer me some information on CD pickup with
regards to:


1. pinout


2. the structure, especially optics ( I have observed that the pickup
structure differs from one model to another, is it possible for you
to list or provide source of optics information of the cd pickup along
with the product model, etc).


Thank you very much for your aid rendered and time. I have read
through sam laser faq but it is too generalised.


It's not the Laser FAQ that might be of use but the CD player repair
guide, since it describes in more detail the functions of the various
parts of a CD pickup.

If you have a specific model in mind, you should list it here. Someone
may have a schematic of the player using it which would then have the
pinout.

--- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header above is
ignored unless my full name is included in the subject line. Or, you can
contact me via the Feedback Form in the FAQs.
  #3   Report Post  
mikelim
 
Posts: n/a
Default

Hi there,

I have dismanted a few old cdrom drive.

I feel it will be easier for me to perhaps ask what schematics you have
and I will buy or get the cd player or drive model than the other way
around.

Please advise.

Thank you for your time.

  #4   Report Post  
sofie
 
Posts: n/a
Default

mikelim:

"mikelim" wrote in message
Hi there,
I have dismanted a few old cdrom drive.


What are makes and models of the "few old cdrom drives" that you have?

I feel it will be easier for me to perhaps ask what schematics you have
and I will buy or get the cd player or drive model than the other way
around.


most certainly not easier.... reply post with the make and models.


Please advise.

Thank you for your time.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Laser Pickup SF-P101N 15 pin Wanted Alt Beer Electronics Repair 3 June 5th 05 05:56 PM
OT Kinda: Wood bed board dimensions for 1951 Ford pickup bed DL Woodworking 5 May 10th 05 12:34 AM
Hitachi DVD Player pickup cariboo1946 Electronics Repair 7 November 4th 04 05:59 PM
Pickup topper (cap) needs new "windows" Terry McCreary Metalworking 4 August 23rd 04 08:52 AM
CLD-2950 Laserdisk pickup repair Remove _ for valid address Electronics Repair 3 July 29th 04 11:04 PM


All times are GMT +1. The time now is 08:54 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"