Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Desperately Seeking Schematic: Labtec LCS-2412 speaker system
Greetings...
I have a Labtec powered speaker system model LCS-2412. This is a 2.1 system intended for computer use. It is quite old, purchased circa 1991. Around '96 or so, I noticed that the treble control was only working on one channel. The unit was out of warranty by then, but since these speakers have just the right features for me, I decided to try to fix them myself rather than try to find a replacement for them. But Labtec support refused to sell me a schematic, stating that it was "proprietary information" and per their policy they could not provide it. Since then I've simply put up with the problem, but recently the front panel headphone jack was damaged, so I called Labtec to see if I could get a replacement part. They informed me that Logitech had acquired Labtec a while ago, and when I then called Logitech, they informed me that the schematic was no longer available! (gee, when was it ever available?) Is there any remote chance someone here might have this? I know it's a long shot, but I'm desperate! Thanks... |
#2
|
|||
|
|||
Mr. Land wrote:
I have a Labtec powered speaker system model LCS-2412. This is a 2.1 system intended for computer use. It is quite old, purchased circa 1991. Around '96 or so, I noticed that the treble control was only working on one channel. The unit was out of warranty by then, but since these speakers have just the right features for me, I decided to try to fix them myself rather than try to find a replacement for them. Reverse engineering should be quite easy for such equipment. --- Met vriendelijke groet, Maarten Bakker. |
#3
|
|||
|
|||
Link to picture...
http://www.epinions.com/S0140593_Labtec_LCS_2412 I don't know about Labtec, but you could find some headphone connectors at Radio Shack You can check their site at: http://www.radioshack.com Look under "Parts, Tools & Wire" category for "Connectors & Connectivity" and also "Component Parts". If you go to Radio Shack, make sure that you look for a chest-like drawers, as they put some component there in drawers, just ask the sales person if you can't find it. You will need soldering tools. You can also check DigiKey, but they have a lot of connectors. They sell all sorts of parts. Look here under Audio--Connectors: http://dkc1.digikey.com/US/PDF/T052/P1.html Here is a direct link to the PDF pages that show the connectors: http://dkc3.digikey.com/PDF/T052/0281.pdf http://dkc3.digikey.com/PDF/T052/0283-0285.pdf Make sure that you order the right connector, i.e., Mono or Stereo. Check the dimensions too. Digikey ships the same day, there is no minimum to order, but they add $5 if your total order is less than $25. http://www.digikey.com Here is another parts seller: http://www.mouser.com Good luck! "Mr. Land" wrote in message oups.com... Greetings... I have a Labtec powered speaker system model LCS-2412. This is a 2.1 system intended for computer use. It is quite old, purchased circa 1991. Around '96 or so, I noticed that the treble control was only working on one channel. The unit was out of warranty by then, but since these speakers have just the right features for me, I decided to try to fix them myself rather than try to find a replacement for them. But Labtec support refused to sell me a schematic, stating that it was "proprietary information" and per their policy they could not provide it. Since then I've simply put up with the problem, but recently the front panel headphone jack was damaged, so I called Labtec to see if I could get a replacement part. They informed me that Logitech had acquired Labtec a while ago, and when I then called Logitech, they informed me that the schematic was no longer available! (gee, when was it ever available?) Is there any remote chance someone here might have this? I know it's a long shot, but I'm desperate! Thanks... |
#4
|
|||
|
|||
Mr. Land wrote:
Greetings... I have a Labtec powered speaker system model LCS-2412. This is a 2.1 system intended for computer use. It is quite old, purchased circa 1991. Around '96 or so, I noticed that the treble control was only working on one channel. The unit was out of warranty by then, but since these speakers have just the right features for me, I decided to try to fix them myself rather than try to find a replacement for them. But Labtec support refused to sell me a schematic, stating that it was "proprietary information" and per their policy they could not provide it. Since then I've simply put up with the problem, but recently the front panel headphone jack was damaged, so I called Labtec to see if I could get a replacement part. They informed me that Logitech had acquired Labtec a while ago, and when I then called Logitech, they informed me that the schematic was no longer available! (gee, when was it ever available?) Is there any remote chance someone here might have this? I know it's a long shot, but I'm desperate! Thanks... I have the LCS2420, but mine has only the bass control. What usually happens is that someone smacks the knob and busts the pot. They're typically a dual planar pot that's gonna be hard to replace. The circuitry is usually so simple that you can download the chip datasheet and the sample application schematic will be real close. mike -- Return address is VALID but some sites block emails with links. Delete this sig when replying. .. Wanted, PCMCIA SCSI Card for HP m820 CDRW. FS 500MHz Tek DSOscilloscope TDS540 Make Offer Wanted 12" LCD for Compaq Armada 7770MT. Bunch of stuff For Sale and Wanted at the link below. MAKE THE OBVIOUS CHANGES TO THE LINK htremovethistp://www.geocities.com/SiliconValley/Monitor/4710/ |
#5
|
|||
|
|||
Yep, I know I could use a "generic" stereo 3.5 mm jack w/ integral
switches for the speakers...but the broken jack on this unit is fairly special: flat-shaped, mounts right against the board, has a weird little 2-pole, 2-position slide switch at the rear of it that's moved when you insert a plug...thought I'd try a very long shot to see if any had a set of these in a junk pile somewhere. Thanks for all the great tips and pointers! |
#6
|
|||
|
|||
Mmmm...for you, perhaps! Me, I get lost as soon as I find 3+
components connected together! Thanks for the suggestion... |
#7
|
|||
|
|||
You know, it never occurred to me to simply check the pot. Thanks for
the idea. |
#8
|
|||
|
|||
find the major IC on the PWB.
Look up the data sheet and application notes for that IC and your circuit will probably be very similar. Mark |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Repost: Pioneer proj. model SD-P452 no sound desperately seeking schematic | Electronics Repair | |||
Seeking Schematic for Sinclair SC110 Scope | Electronics Repair | |||
Seeking: schematic for Philips PM3260E and Gold OS1100 | Electronics Repair | |||
Desperately seeking flyback FCK14B025A | Electronics Repair |