 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Fluke 8060a Switch Problem
I'm looking for help with my 8060a. I have 2 problems.
1. After power-on I get a "- OV". Normally an "OV" means that you are out of range...I never see a "-" sign there. I cannot make any measurements. 2. I performed the Switch Test and compared it with the values in the manual. It looks like switch sw6 (200mA) and sw5 (20mA) are not working correctly ... I get a zero value instead of the values in the manual. Any ideas on issue 1? Are the switches replaceable and would you recommend doing that or any suggestions for repair. I cleaned all contacts with isopropyl alcohol. And blew out dust with a can of air. thanks, Joe |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 3 or 4 way switch problem | Home Repair | |||
| Fluke 8000A problem: saturation at 1V | Electronics Repair | |||
| strange problem with flourescent lights and switch | Home Repair | |||
| Duplex Switch Wiring Help | Home Repair | |||
| help selecting a manual transfer switch | Home Repair | |||
Threaded Mode
