Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Dear members,
During a visit in the US I purchased a couple of X2X wrist watch 2-way radios, including the adapter. I enjoyed the product very much. When I returned to Israel, where I live, I tried to recharge the batteries, and I used 200-to-110V adapter, to which I plugged the original XA10 adapter. Unfortunately, due to malfunction of the down-converter, the XA10 adapter burned out. I want now to buy a transformer, here in Israel, and to use it directly as the adapter for charging my X2X batteries. I understand that the adapter output should be rated 9VDC @100mA (2.2W). I need only information regarding the plug that goes to the wrist-watch. It looks like stereo-headphones plug- and I need to know the polarity of the voltage, namely, on the three terminals, which is the positive, the negative, and what is the third one. Please help me with it. I want to enjoy the 2-way radio here, just like I did in the US. Thank you in advance, Dr.Y. Gofer |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
SONY 35" Dual PIP -Video Blackout Problem | Electronics Repair | |||
Paslode IM250A Cordless Finish Nailer, Stripped Treads Problem | Woodworking | |||
Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
Problem with room getting too hot from facing the south (even in late October) | Home Repair | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair |