Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Panasonic Genius Microwave
dx375 wrote:
Worth fixing? For $150 delivered you can buy any number of good quality two cubic foot microwave ovens. You'll pay that much just for a service call. Welcome to the disposable society. |
#2
|
|||
|
|||
"dx375" dx375athotmail.com@ wrote in message ... Just out of warranty 2.2 cubic foot Genius microwave just quit. (2+ years) Pad and clock works, but when it powers on to cook. it makes a buzzing noise about 5 seconds in and shuts off, no ding. Made in China crap..... I realize the magnetron has a 5 year warranty but it's the labor that get you ..... Worth fixing? Cheers Dave Mine died too. $2 MOV that blew it's guts out. It took out a heat sink mounted component which I currently can't ID (it's sitting on the heatsink besides the chopper and the Schottkys). N |
#3
|
|||
|
|||
dx375 wrote: Just out of warranty 2.2 cubic foot Genius microwave just quit. (2+ years) Pad and clock works, but when it powers on to cook. it makes a buzzing noise about 5 seconds in and shuts off, no ding. Made in China crap..... I realize the magnetron has a 5 year warranty but it's the labor that get you ..... Worth fixing? Cheers Dave I'm not a microwave fix it guy (but not for lack of effort)--but is the magnetron cooling fan working--can you hear it running?--perhaps its hungup, resulting in a thermal switch overheating and shutting down the unit after 5 seconds of run time. |
#4
|
|||
|
|||
dx375 wrote:
The oven went into the shop today for an estimate as there is still some warranty left with the magnetron....parts only covered Anything else will be parts and labor...... More than $150 I will wager. |
#6
|
|||
|
|||
dx375 wrote:
Magnetron had a meltdown it seems, not worth fixing.....too expensive... Inquiring minds want to know....was it more than $150 to repair? |
#7
|
|||
|
|||
"dx375" dx375athotmail.com wrote in message ... Magnetron had a meltdown it seems, not worth fixing.....too expensive... Recommended to toss and purchase a new one...any recommendations in the 2 cubic foot sizes? Very happy with the Sharp Sensor 1200W N |
#8
|
|||
|
|||
dx375 wrote:
yes....some other components were fried also..... No surprise - nowadays on small appliances under $350 you are almost always better off trashing them and buying a new one. I hope they didn't charge you too much for the estimate. |
#9
|
|||
|
|||
dx375--
Thanks for the update--sorry to hear your microwave died at the shop. ;-( Tut |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Samsung Microwave & GE Microwave oven | Electronics Repair | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
ATT; Hobbyists and Repairmen I have accumulated a room of ICS, Transistors, Diodes , Mem Chips , Proms etc | Electronics Repair | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair |