Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Iiyama VisionMaster 501 (S101GT) no display !?!
Monitor powers up into standby (amber LED).
When the PC is turned on the monitor switches out of standby (green LED) but there is no display. Any idea what to look for? |
#2
|
|||
|
|||
"mike67fb" wrote in message lkaboutelectronicequipment.com... Monitor powers up into standby (amber LED). When the PC is turned on the monitor switches out of standby (green LED) but there is no display. Any idea what to look for? Hi Mike, I have repaired 4 off of these monitors in the last 2 years with the same fault. On my units the fault was always the same. On the Tube base pcb there is a fuse, F601, which blows for no apparent reason, replacing this has fixed all 4 units with no comebacks. This is a wire ended green coloured fuse. I hope that this helps. Ian French. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Flakey LCD display on PowerBook | Electronics Repair | |||
iiyama visionmaster pro 452 strange behaviour at power on | Electronics Repair | |||
IIYAMA Monitor model : S102GT, and DELL P1110, are they the same monitor? | Electronics Repair | |||
Display has no hard wire connections. | Electronics Repair | |||
Siemens Gigaset 2420 Display problem | Electronics Repair |