 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Washer Transmission Seal
I have a GE washer that is about 15 years old. It appears that the
bottom transmission seal is leaking. How easy is it to replace this seal? Does the tansmission need to be removed? |
|
#2
|
|||
|
|||
|
Wrong group. Try rec.crafts.metalworking. Lots of guys work on their own
stuff there. JR wrote: I have a GE washer that is about 15 years old. It appears that the bottom transmission seal is leaking. How easy is it to replace this seal? Does the tansmission need to be removed? -- -------------------------------------------------------------- Home Page: http://www.seanet.com/~jasonrnorth |
|
#3
|
|||
|
|||
|
"JR North" wrote in message ... Wrong group. Try rec.crafts.metalworking. Lots of guys work on their own stuff there. JR wrote: I have a GE washer that is about 15 years old. It appears that the bottom transmission seal is leaking. How easy is it to replace this seal? Does the tansmission need to be removed? -- What do you mean wrong group? Lots of *us* work on our own stuff too! Replacing the seal is likely not too hard, nor is removing the transmission. First call an appliance shop and see if a new seal is available. |
|
#4
|
|||
|
|||
|
Youse do? Seems like alot of posters here can't get the back of the
teewee off...present company excluded. JR James Sweet wrote: "JR North" wrote in message ... Wrong group. Try rec.crafts.metalworking. Lots of guys work on their own stuff there. JR wrote: I have a GE washer that is about 15 years old. It appears that the bottom transmission seal is leaking. How easy is it to replace this seal? Does the tansmission need to be removed? -- What do you mean wrong group? Lots of *us* work on our own stuff too! Replacing the seal is likely not too hard, nor is removing the transmission. First call an appliance shop and see if a new seal is available. -- -------------------------------------------------------------- Home Page: http://www.seanet.com/~jasonrnorth |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Washer Transmission Seal | Home Ownership | |||
| change washer hookup --- but no shutoff valve in sight! | Home Repair | |||
| trenching and other uses of a high pressure washer | Home Repair | |||
| Maytag Neptune Washer lousy customer service for repair; I would think twice next time and buy from Sears | Home Repair | |||
| Maytag Neptune Washer lousy customer service for repair; I would think twice next time and buy from Sears | Home Ownership | |||
Linear Mode
