DIYbanter - Interesting First Cut at Spice Modeling of TLP191B

DIYbanter (https://www.diybanter.com/)

- Electronic Schematics (https://www.diybanter.com/electronic-schematics/)

- - Interesting First Cut at Spice Modeling of TLP191B (https://www.diybanter.com/electronic-schematics/369519-interesting-first-cut-spice-modeling-tlp191b.html)

Interesting First Cut at Spice Modeling of TLP191B

Interesting First Cut at Spice Modeling of TLP191B

Interesting First Cut at Spice Modeling of TLP191B

"Jim Thompson" wrote in message
.. .

Interesting First Cut at Spice Modeling of TLP191B...

http://www.analog-innovations.com/SED/TLP191B_2014-04-06.pdf

Tanh very useful. However... I haven't run your model, but it looks like
you have omitted input diode modelling. The clue is that I don't see any
Diode model with N !=1

I did this model for a H11FXM opto a while back. Matches DC curves very
well.

..SUBCKT h11fxm_XN 1 2 3 4
*
B1 3 4 i=0.04*tanh(20*V(3,4))*I(V1)
D1 1 5 DMod
V1 5 2 DC 0
c1 3 4 10p
c2 1 3 0.2p
c3 2 4 0.2p
..model DMod D(is=1p Rs=3 CJO=50p Tt=10n Bv=50 Ibv=0 N=2.15)
..ENDS

http://www.kevinaylward.co.uk/ee/misc/H11FXM.png

Kevin Aylward B.Sc.

www.anasoft.co.uk
SuperSpice

Interesting First Cut at Spice Modeling of TLP191B

On Mon, 7 Apr 2014 18:58:47 +0100, "Kevin Aylward"
wrote:

"Jim Thompson" wrote in message
. ..

Interesting First Cut at Spice Modeling of TLP191B...

http://www.analog-innovations.com/SED/TLP191B_2014-04-06.pdf

Tanh very useful. However... I haven't run your model, but it looks like
you have omitted input diode modelling. The clue is that I don't see any
Diode model with N !=1

I did this model for a H11FXM opto a while back. Matches DC curves very
well.

.SUBCKT h11fxm_XN 1 2 3 4
*
B1 3 4 i=0.04*tanh(20*V(3,4))*I(V1)
D1 1 5 DMod
V1 5 2 DC 0
c1 3 4 10p
c2 1 3 0.2p
c3 2 4 0.2p
.model DMod D(is=1p Rs=3 CJO=50p Tt=10n Bv=50 Ibv=0 N=2.15)
.ENDS

http://www.kevinaylward.co.uk/ee/misc/H11FXM.png

Thanks, Kevin, I'll try that out.

Kevin Aylward B.Sc.

www.anasoft.co.uk
SuperSpice

...Jim Thompson
--
| James E.Thompson | mens |
| Analog Innovations | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| San Tan Valley, AZ 85142 Skype: Contacts Only | |
| Voice:(480)460-2350 Fax: Available upon request | Brass Rat |
| E-mail Icon at http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.

Interesting First Cut at Spice Modeling of TLP191B

On Mon, 7 Apr 2014 18:58:47 +0100, "Kevin Aylward"
wrote:

"Jim Thompson" wrote in message
. ..

Interesting First Cut at Spice Modeling of TLP191B...

http://www.analog-innovations.com/SED/TLP191B_2014-04-06.pdf

Tanh very useful. However... I haven't run your model, but it looks like
you have omitted input diode modelling. The clue is that I don't see any
Diode model with N !=1

I did this model for a H11FXM opto a while back. Matches DC curves very
well.

.SUBCKT h11fxm_XN 1 2 3 4
*
B1 3 4 i=0.04*tanh(20*V(3,4))*I(V1)
D1 1 5 DMod
V1 5 2 DC 0
c1 3 4 10p
c2 1 3 0.2p
c3 2 4 0.2p
.model DMod D(is=1p Rs=3 CJO=50p Tt=10n Bv=50 Ibv=0 N=2.15)
.ENDS

http://www.kevinaylward.co.uk/ee/misc/H11FXM.png

Kevin Aylward B.Sc.

www.anasoft.co.uk
SuperSpice

Here's a quick sim I did of an optocoupler with its output clamped to
make it faster. I hacked an LT Spice library part to sim the Avago
coupler with variable CTR. It matches the hardware behavior pretty
well.

https://dl.dropboxusercontent.com/u/..._Input_Sim.jpg

That particular run is a sweep to determine the voltage threshold.

--

John Larkin Highland Technology, Inc

jlarkin att highlandtechnology dott com
http://www.highlandtechnology.com

Interesting First Cut at Spice Modeling of TLP191B