Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 800
Default MC1350 appnote.

Is there an appnote for the MC1350?

TIA.


  #2   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 2
Default MC1350 appnote.


"ian field" wrote in message
...
Is there an appnote for the MC1350?

TIA.



I used it in my Yaisu FT-101 35 years ago as a Rf compressor. The Yaisu
generated the SSB signal around 3 Mhz. I ended up replacing the final
tubes with industrial 6146s (6080 I think). The sweep tubes couldn't
take the increase in average power. Everyone thought I was running a
2KW linear when I switched the compressor on.

Here is one data sheet
http://www.hamradioindia.com/datasheets/mc1350.pdf

--
A man is known by the company he keeps- Unknown

Anyolmouse

  #3   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 800
Default MC1350 appnote.


"Anyolmouse" wrote in message
...

"ian field" wrote in message
...
Is there an appnote for the MC1350?

TIA.



I used it in my Yaisu FT-101 35 years ago as a Rf compressor. The Yaisu
generated the SSB signal around 3 Mhz. I ended up replacing the final
tubes with industrial 6146s (6080 I think). The sweep tubes couldn't
take the increase in average power. Everyone thought I was running a
2KW linear when I switched the compressor on.

Here is one data sheet
http://www.hamradioindia.com/datasheets/mc1350.pdf


There's no problem finding the datasheet - its the appnote I'm looking for.


  #4   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 2,221
Default MC1350 appnote.

On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(

A cross reference says the following parts are "similar":

LM703LN, SN76600P, uA757DC/M, MC1490

Good luck!

The data sheet is pretty complete. What info do you need that's not
on the datasheet?

...Jim Thompson
--
| James E.Thompson, CTO | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona 85048 Skype: Contacts Only | |
| Voice480)460-2350 Fax: Available upon request | Brass Rat |
| E-mail Icon at http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
  #5   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 800
Default MC1350 appnote.


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(

A cross reference says the following parts are "similar":

LM703LN, SN76600P, uA757DC/M, MC1490

Good luck!

The data sheet is pretty complete. What info do you need that's not
on the datasheet?


Thanks, I'll search on those numbers.

Most of the application examples use an inductive load (usually tuned) I'm
looking for examples with resistive load.




  #6   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 2,221
Default MC1350 appnote.

On Thu, 21 Jan 2010 22:19:29 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(

A cross reference says the following parts are "similar":

LM703LN, SN76600P, uA757DC/M, MC1490

Good luck!

The data sheet is pretty complete. What info do you need that's not
on the datasheet?


Thanks, I'll search on those numbers.

Most of the application examples use an inductive load (usually tuned) I'm
looking for examples with resistive load.


From my vague memories of it... I helped design it (it was a spin-off
from the 60MHz military radar IF)... you need to be careful with a DC
load, otherwise you'll saturate the output differential pair.

What exactly are you trying to do that you want a resistive load?

...Jim Thompson
--
| James E.Thompson, CTO | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona 85048 Skype: Contacts Only | |
| Voice480)460-2350 Fax: Available upon request | Brass Rat |
| E-mail Icon at http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
  #7   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 800
Default MC1350 appnote.


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 22:19:29 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(

A cross reference says the following parts are "similar":

LM703LN, SN76600P, uA757DC/M, MC1490

Good luck!

The data sheet is pretty complete. What info do you need that's not
on the datasheet?


Thanks, I'll search on those numbers.

Most of the application examples use an inductive load (usually tuned) I'm
looking for examples with resistive load.


From my vague memories of it... I helped design it (it was a spin-off
from the 60MHz military radar IF)... you need to be careful with a DC
load, otherwise you'll saturate the output differential pair.

What exactly are you trying to do that you want a resistive load?


They sometimes turn up 2 at a time on old 5&1/4 HDD logic boards, there's
already a couple in the parts drawer and I found a couple more on a HDD
board while clearing out a junk box.

Since I now have so many, I thought maybe I should try to do something with
them. My first thought was an audio compressor.


  #8   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 2,221
Default MC1350 appnote.

On Fri, 22 Jan 2010 15:31:11 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 22:19:29 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(

A cross reference says the following parts are "similar":

LM703LN, SN76600P, uA757DC/M, MC1490

Good luck!

The data sheet is pretty complete. What info do you need that's not
on the datasheet?

Thanks, I'll search on those numbers.

Most of the application examples use an inductive load (usually tuned) I'm
looking for examples with resistive load.


From my vague memories of it... I helped design it (it was a spin-off
from the 60MHz military radar IF)... you need to be careful with a DC
load, otherwise you'll saturate the output differential pair.

What exactly are you trying to do that you want a resistive load?


They sometimes turn up 2 at a time on old 5&1/4 HDD logic boards, there's
already a couple in the parts drawer and I found a couple more on a HDD
board while clearing out a junk box.

Since I now have so many, I thought maybe I should try to do something with
them. My first thought was an audio compressor.


You'll get clicks and pops. For audio compression an inverted Bipolar
device or a JFET will work *much* better.

...Jim Thompson
--
| James E.Thompson, CTO | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona 85048 Skype: Contacts Only | |
| Voice480)460-2350 Fax: Available upon request | Brass Rat |
| E-mail Icon at http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
  #9   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 2
Default MC1350 appnote.


"ian field" wrote in message
...

"Jim Thompson"

/Snicker
wrote in message ...
On Thu, 21 Jan 2010 22:19:29 -0000, "ian field"
wrote:


"Jim Thompson"

/Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(

A cross reference says the following parts are "similar":

LM703LN, SN76600P, uA757DC/M, MC1490

Good luck!

The data sheet is pretty complete. What info do you need that's

not
on the datasheet?

Thanks, I'll search on those numbers.

Most of the application examples use an inductive load (usually

tuned) I'm
looking for examples with resistive load.


From my vague memories of it... I helped design it (it was a

spin-off
from the 60MHz military radar IF)... you need to be careful with a

DC
load, otherwise you'll saturate the output differential pair.

What exactly are you trying to do that you want a resistive load?


They sometimes turn up 2 at a time on old 5&1/4 HDD logic boards,

there's
already a couple in the parts drawer and I found a couple more on a

HDD
board while clearing out a junk box.

Since I now have so many, I thought maybe I should try to do something

with
them. My first thought was an audio compressor.


FWIF, about the same time I used the MC1350P for an RF SSB compressor an
article was published in one of the ham radio magazines showing how to
build an outboard audio compressor using the MC1350P. In order to get it
to work the author modulated an RF signal and compressed the RF and then
demodulated the RF signal and applied the resulting compressed audio
into the microphone jack. I found it much easier to compress the
transceiver's SSB modulated signal and then making sure the signal was
amplified linearly after it was compressed. The chip was designed for RF
applications in TV IFs, not audio.

--
We have met the enemy and he is us-- Pogo

Anyolmouse

  #10   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 182
Default MC1350 appnote.

On Fri, 22 Jan 2010 15:31:11 -0000, "ian field" wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 22:19:29 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(

A cross reference says the following parts are "similar":

LM703LN, SN76600P, uA757DC/M, MC1490

Good luck!

The data sheet is pretty complete. What info do you need that's not
on the datasheet?

Thanks, I'll search on those numbers.

Most of the application examples use an inductive load (usually tuned) I'm
looking for examples with resistive load.


From my vague memories of it... I helped design it (it was a spin-off
from the 60MHz military radar IF)... you need to be careful with a DC
load, otherwise you'll saturate the output differential pair.

What exactly are you trying to do that you want a resistive load?


They sometimes turn up 2 at a time on old 5&1/4 HDD logic boards, there's
already a couple in the parts drawer and I found a couple more on a HDD
board while clearing out a junk box.

Since I now have so many, I thought maybe I should try to do something with
them. My first thought was an audio compressor.

I have done that with a MC1490, but getting the control loop to behave was
challenging.


  #11   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 2,221
Default MC1350 appnote.

On Thu, 21 Jan 2010 22:19:29 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(

A cross reference says the following parts are "similar":

LM703LN, SN76600P, uA757DC/M, MC1490

Good luck!

The data sheet is pretty complete. What info do you need that's not
on the datasheet?


Thanks, I'll search on those numbers.

Most of the application examples use an inductive load (usually tuned) I'm
looking for examples with resistive load.


I've struck out with ON Semi, looks like their maintenance of old
Motorola AppNotes is very poor.

But they sent me this link...

http://www.onsemi.com/PowerSolutions...?type=AppNotes

...Jim Thompson
--
| James E.Thompson, CTO | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona 85048 Skype: Contacts Only | |
| Voice480)460-2350 Fax: Available upon request | Brass Rat |
| E-mail Icon at http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
  #12   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 800
Default MC1350 appnote.


"Jim Thompson" wrote in
message ...
On Thu, 21 Jan 2010 22:19:29 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(

A cross reference says the following parts are "similar":

LM703LN, SN76600P, uA757DC/M, MC1490

Good luck!

The data sheet is pretty complete. What info do you need that's not
on the datasheet?


Thanks, I'll search on those numbers.

Most of the application examples use an inductive load (usually tuned) I'm
looking for examples with resistive load.


I've struck out with ON Semi, looks like their maintenance of old
Motorola AppNotes is very poor.

But they sent me this link...

http://www.onsemi.com/PowerSolutions...?type=AppNotes


Thanks.


  #13   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 800
Default MC1350 appnote.


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(


Not so long ago I found a repository of Motorola's appnotes, now you've told
me the number it will be easy to check the list for it.

Thanks.


  #14   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 2,221
Default MC1350 appnote.

On Thu, 21 Jan 2010 22:22:25 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(


Not so long ago I found a repository of Motorola's appnotes, now you've told
me the number it will be easy to check the list for it.

Thanks.


Please share the link to the repository. I used to know it, but lost
it myself :-(

...Jim Thompson
--
| James E.Thompson, CTO | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona 85048 Skype: Contacts Only | |
| Voice480)460-2350 Fax: Available upon request | Brass Rat |
| E-mail Icon at http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
  #15   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 800
Default MC1350 appnote.


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 22:22:25 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(


Not so long ago I found a repository of Motorola's appnotes, now you've
told
me the number it will be easy to check the list for it.

Thanks.


Please share the link to the repository. I used to know it, but lost
it myself :-(


It was a webpage I found while I was searching for something else, so I
downloaded the appnotes and moved on.

One possibility is, I could zip the folder and post it here, or its possible
I may have used CutePDF to print the page - this usually lists the URL at
the bottom of each page.

Its on my other PC so I'll look when I'm at that machine.




  #16   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 2,221
Default MC1350 appnote.

On Fri, 22 Jan 2010 15:23:45 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 22:22:25 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(

Not so long ago I found a repository of Motorola's appnotes, now you've
told
me the number it will be easy to check the list for it.

Thanks.


Please share the link to the repository. I used to know it, but lost
it myself :-(


It was a webpage I found while I was searching for something else, so I
downloaded the appnotes and moved on.

One possibility is, I could zip the folder and post it here, or its possible
I may have used CutePDF to print the page - this usually lists the URL at
the bottom of each page.

Its on my other PC so I'll look when I'm at that machine.


Thanks!

...Jim Thompson
--
| James E.Thompson, CTO | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona 85048 Skype: Contacts Only | |
| Voice480)460-2350 Fax: Available upon request | Brass Rat |
| E-mail Icon at http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
  #17   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 436
Default MC1350 appnote.

On Fri, 22 Jan 2010 15:23:45 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 22:22:25 -0000, "ian field"
wrote:


"Jim Thompson" /Snicker
wrote in message ...
On Thu, 21 Jan 2010 18:18:21 -0000, "ian field"
wrote:

Is there an appnote for the MC1350?

TIA.


The appnote is AN545A/D, but I can't find it anywhere :-(

Not so long ago I found a repository of Motorola's appnotes, now you've
told
me the number it will be easy to check the list for it.

Thanks.


Please share the link to the repository. I used to know it, but lost
it myself :-(


It was a webpage I found while I was searching for something else, so I
downloaded the appnotes and moved on.

One possibility is, I could zip the folder and post it here, or its possible
I may have used CutePDF to print the page - this usually lists the URL at
the bottom of each page.

Its on my other PC so I'll look when I'm at that machine.


It used to be

http://merchant.hibbertco.com/servlet/MtrlDeactServlet

but this was closed a few years ago.

RL
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hitachi MOSFET appnote - Hitachi_Mosfet_appnote.PDF Ross Herbert Electronic Schematics 0 July 6th 09 01:37 PM


All times are GMT +1. The time now is 02:08 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"