Please to convert these PCB files? - 20V_Layout.pcb (1/1) [11K]
 

My application imports only PDF or DXF files. These files are PCB extension.

Would some kind soul simply import these and export a PDF and DXF file for
each? Repost here.

They're pretty small...

Thanks,
--
Al, the usual

Please to convert these PCB files? - 20V_Layout.pcb (1/1) [11K]
 

"Usual Suspect" schreef in bericht
obal.net...
My application imports only PDF or DXF files. These files are PCB
extension.

Would some kind soul simply import these and export a PDF and DXF file for
each? Repost here.

They're pretty small...

Thanks,
--
Al, the usual

Something like this?

petrus bitbyter

Please to convert these PCB files? - 20V_Layout.pcb (1/1) [11K]
 

Something like this?

petrus bitbyter

Thanks.

Hmm.. I was expecting PCB trace art also. Sure there's nothing else in those
files?

Guess I'll have to ask around...

Thanks,
--
Al, the usual

Please to convert these PCB files? - 20V_Layout.pcb (1/1) [11K]
 

"Usual Suspect" schreef in bericht
obal.net...
Something like this?

petrus bitbyter

Thanks.

Hmm.. I was expecting PCB trace art also. Sure there's nothing else in
those
files?

Guess I'll have to ask around...

Thanks,
--
Al, the usual


Opened the files using ExpressPCB, apparently the the right choise. The file
contains a bottomlayer, a toplayer and a silkscreen. Traces are either not
present or well hidden. Most likely you need the schematic file as well
before you can make connections visible.

petrus bitbyter

Please to convert these PCB files? - 20V_Layout.pcb (1/1) [11K]
 

petrus bitbyter wrote:

"Usual Suspect" schreef in bericht
obal.net...

Something like this?

petrus bitbyter

Thanks.

Hmm.. I was expecting PCB trace art also. Sure there's nothing else in
those
files?

Guess I'll have to ask around...

Thanks,
--
Al, the usual



Opened the files using ExpressPCB, apparently the the right choise. The file
contains a bottomlayer, a toplayer and a silkscreen. Traces are either not
present or well hidden. Most likely you need the schematic file as well
before you can make connections visible.

petrus bitbyter


The schematic file is not needed, except as a "help" for layout.
ExpressPCB only allows the top layer, bottom layer and silk screen;
it may be a long time before they allow inner layers (if at all).
So if there are no traces for top or bottom, then there are no
traces, period.

Please to convert these PCB files? - 20V_Layout.pcb (1/1) [11K]
 

"petrus bitbyter" wrote in message
ll.nl...

Something like this?

petrus bitbyter



Impressive.....

Prior to not asking where it came from.....

I looked at it in notepad and found nothing to indicate what it might be. OE
said it was an EDS file and then I gave up.

Not that I'm complaining or anything....

Dude points plus a lot and don't multiply them by my credibility.


DNA