| Home |
| Search |
| Today's Posts |
 |
|
Menu
| Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings. |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
| Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#25
Posted to alt.binaries.schematics.electronic
|
|||
|
|||
Output bounce, can this be fixed?
John Popelish wrote:
Anthony Fremont wrote: Thanks for the advice folks. :-) I can take care of the bounce by terminating the output pin into a 47Ohm resistor followed by a 68pF cap to ground. If you run a ground wire in parallel with the signal wire (the one with the series 470 ohm resistor), as a return path, you may get rid of a lot of the bump you see on the sine wave. Thanks John, I'll try it and see what happens. :-) |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Key bounce problem | Electronics Repair | |||
| de-bounce | Electronics | |||
| More HELP with relay bounce needed | Electronics | |||
| OT-CNN: Bush Got Bounce From Dem Convention | Metalworking | |||
| Stationary planers - fixed head or fixed table? | Woodworking | |||
Threaded Mode
