Also check for coolant leakage from the crts. Common problem with these
sets.
"Skype_man" wrote in message
...
What's the model? The green IS fixed, & the blue, & red
overlay onto the green. The main green adjustment for getting
the green lined up sguare for reference, is the rings on the CRT
neck (don't touch them), for the problem you have. You likely
need to replace the two convergenc IC's, & possibly a couple
of low value resistors. Sky.



"meabeln" wrote in message
lkaboutelectronicequipment.com...
I have a 54'' Samsung Projection TV, and last week the convergence messed
its self up. When i turned it on the green layer (of the blue/red/green
layers) was distored to a rainbow shape. Where the bottom to coreners
were
pulled down off the screen, and the to to corners were pulled down as
well. I can move the blue and red layers around, but i can not find out
how to reset/adjust the green layer. Called Samsung and they said it
sounds like i need a new convergence board. Is that true, or can i do
anything else to fix the problem?? Thanks