Crimping large cable lugs without a crimper
In article , Ignoramus25589 says...
As far as soldering. I guess for larger cables I need to use a propane
torch. Is that right?
Or O/A. The trap here is that as you try to solder the joint,
the solder simply wicks up the stranded wire and leaves you with
a dry joint and effectively solid wire.
The trick is to mechanically compress the sranded wire so capillary
action cannot wick the solder up the line.
For smaller stuff I use a stainless hemostat.
Jim
--
==================================================
please reply to:
JRR(zero) at pkmfgvm4 (dot) vnet (dot) ibm (dot) com
==================================================
|