odd thread required for tool.
In article , Carmine Castiglia
says...
Better check your math there, Jim. I think it's more like 0.0059 inch error
over 1/4".
Ah, I did the calculation correctly - but it was for the pitch error in
*one* thread.
For a quarter inch length of 26 tpi, there are about six threads,
so the *accumulated* error is indeed about six thou.
Sorry for the confusion - but I think this could be a passable way
for him to fabricate a fixture.
Jim
--
==================================================
please reply to:
JRR(zero) at pkmfgvm4 (dot) vnet (dot) ibm (dot) com
==================================================
|