On Tue, 04 Oct 2005 22:29:21 +0100, Andy Wade
wrote:
[snip]
If you are worried, other design options might be to take off the DW &
WM feeds from nearer the mid-point of the ring, running unfused spurs
back to the kitchen (but watch the grouping factors and circuit
impedances), or to wire the whole ring in 4 mm^2.
HTH
Would it be possible to run the short length or the ring, as far as
these high loads, in 4mm^2?
Replace 'spam' with 'org' to reply
|