Dense packed cellulose is the material of choice for exterior walls. I'm not
sure if the machines you rent from the home improvement store have the power
to dense pack the walls. You may want to call in the pros for this job. Good
luck.




wrote in message
oups.com...
Hello,

I live in an 80 year old bungalow with quasi-balloon framing. The
exterior walls currently have no insulation and I'd like to remedy
that. The stud cavities are open to the basement along the foundation
plate due to the framing technique. I was wondering what the
possibility of using an insulation blower from home depot to blow
insulation into the cavity from below would be. Obviously I'd have to
install some blocking after blowing it in to keep it from falling back
into the basement but that would be no big deal.

I was thinking I could shove the hose all the way up the wall, blow it
in and keep blowing as I pulled the hose out.

Any suggestions? Other methods? I know I could pull shingles on the
outside and drill holes but If I can avoid that, it might be better.
The windows in my house go almost to the ceiling so missing the spaces
above the windows would be no big deal.

Matt