Check to see that you have 120 volts at the ballast (primary side) if you do
it's probably the ballast. If you don't, check the switch



"Ron M." wrote in message
ups.com...
I just replaced the two florescent bulbs in our kitchen light fixture.
The old ones suddenly just stopped working. I put the two new ones in,
and they won't come on. Dead as a doornail. I measured the output
voltage at the ends of the fixture, and they're all putting out a
little over 4 volts.

This is a fairly new fixture, about 8 years old. It has one ballast in
the middle. Any ideas?

Thanks,
Ron M.