"John Stumbles" wrote in message
news:cPUDc.84$UA2.39@newsfe5-win...
"RichardS" noaccess@invalid wrote in message
.. .

"Andrew Gabriel" wrote in message
...
In article ,
Lurch writes:
On Mon, 28 Jun 2004 00:24:06 +0100, "John Stumbles"
strung together this:

Are mains and low volatge halogen bulbs the same size?

Yep, the lamps are the same physical size around the front edge.

Also note that it's pretty impossible now to buy anything
other than dichroic LV lamps. The mains ones are easily
available in both types, and if the fitting is designed
for mains full reflector type and you fit LV dichroic,
the fitting will get hotter than designed for.



Hmm, that's interesting - are the GU10 mains halogens not generally
dichroic
then?

The packet of a spare that I have in stock gives no more information on
this
than "Aluminiumised Reflector" - I had always assumed that they would
have
been dichroic just as the LV ones are, but from what you say perhaps
this
is
not the case.

Unfortunately the supplier's web site (John Lewis - you'd think they'd
know
better) doesn't even say if the fittings are mains or LV. I'm guessing
mains.

http://www.johnlewis.com/stores/prod...921&trsid=1558
&m=-1

I'm also planning to fit 20W LV bulbs rather than the original 50s (the
client wants lighting, not roasting :-) so even if the fitting is intended
for reflectors the heat back into it from dichroics shouldn't be too much
(I
hope!).


yep, spec a bit vague on that front! I'd have expected them to at least
state whether it is mains or ELV as a "feature" if nothing else.

From the looks of it I can't see why ELV 20W would be a problem, but as you
could be essentially installing something out-of-spec for a customer then
I'd be a little cautious in your circumstance.

JL ought to be able to answer a specific technical question or put you in
touch with the manufacturer's technical department to clear the issue once
and for all - with a positive answer you should be able to demonstrate that
there has been due diligence when making the mod.

"with the appropriate 12v connector, is there any reason why this fitting
should not be used to house a 20W 12v lamp" kind of thing.


(BTW, many thanks for helping out Pearl & Emma a while ago, they were most
impressed.)

--
Richard Sampson

email me at
richard at olifant d-ot co do-t uk