"John Flatley" wrote in
:
You can support a bunch of airbrushes with that size compressor. I
first used on with a little tiny compressor and it worked OK. As
always,
with paint, be sure the air is clean and dry.
Ed, thanks for the response.
I don't have a problem with the clean air, but dry air in Florida is a
tough requirement, even without a hurricane on the way.
Jack
Ed's probably recommending a moisture & oil filter for the outlet side of
the tank. Not needed for a brad nailer, but important for spraying
coatings. Not expensive, unless you screw up a project.
Patriarch
|