DIYbanter - View Single Post

On 18 Sep 2005 14:43:46 -0700, wrote:

Zenith had a collector for leaking coolant. NEC and Mits used gutters
for a time. Now we put gutters in set with very slow coolant leaks.

Is it worth the time to relieve the pressure in the tubes rather than
install a gutter ?

Let's put it this way, I had a new tube leak, so the expansion is
probably not caused by use (heat and light) and probably continues
slowly. Now I wonder if there's a limit to this phemonenon, that it
stops after a certain point. Then one time I had a Zenith that had
porosity of the coolant chamber housing itself.

Gutters are fugly and I don't like doing it, forget about lead dress,
Damnned if you do, damnned if you don't and damnned if you choose not
to decide. I guess that's the new rule.

JURB

Samsung now have a kit for installing catch-bag using set of covers
(they replaces the original covers held down with 3 screws), with
nipples and hoses to a stiff plastic bag. BUT! The biggest problem
with this is most of them is out of warranty and customer might not
foot the larger estimate to reconvgence all CRTs compared to replace a
leaking CRT with new CRT (Samsung sells complete unit (yoke, CRT and
lens as a assembly).

Unless caught early I can save samsung TV with leaking CRT by cleaning
up the spilt coolant and install the catch-bag system for similar
estimate.

Samsung also have snap-on individual catch bags ONLY for retangular 4
screw type which is older design. Be very careful to snap them on, it
takes very strong force to snap them on, the plastic claws is made of
very brittle plastic and cracks easily.

For RCA stuff, I also notice that expansion chambers (rubber) is very
extrended as inflated, even new. If they were collasped when cold,
fine but if fully popped out, leak down the future is a problem due to
coolant expansion as temps comes up. SPURT! Zzzzzzt crackle!.

I'm doing an RCA (PTK195) having to redo all seals and making sure the
expansion chambers are collapsed.

Cheers, Wizard