Angelo Castellano posting wrote:
I need to cut small pieces of wood ( 3/8 x 3/8" square ) with one end
at an angle of 20 degrees.

I cut cut the wood to length, but have a tough time cutting the
angle. I tried using an mitre saw, but found it uncomfortable as my
hand is too near the blade. Felt a table saw would give the same
problem.

Any suggestions?

Need lots?

Start with a square, thick, long piece, cut the angle on one end,
multiple rip to 3/8 x 3/8, cross cut those.

--
dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico