Angelo Castellano posting wrote:
I need to cut small pieces of wood ( 3/8 x 3/8" square ) with one end at an
angle of 20 degrees.

I cut cut the wood to length, but have a tough time cutting the angle. I tried
using an mitre saw, but found it uncomfortable as my hand is too near the blade.
Felt a table saw would give the same problem.

Any suggestions?


Use a table saw and a sled with two (2) cleats (One on either side of
the piece) tacked to the sled at a 20 degree angle.

SAFE & FAST.

Lew