A Nitromors type stripper is the only way afaik. Flooring adhesive
usually has a pretty volatile solvent so won't respond to anything less.
Similar to Gripfil I think.


The most common type of flooring adhesive is a water based rubber/resin
emulsion and is cream/yellow in colour. If that is what you have then no
solvent I know of will remove it. You're *stuck* with scraping I'm afraid.
Once the water has evaporated and the adhesive has cured it cannot be
re-emulsified and if applied correctly the bond is extremely strong. There
has even been more than one occasion where we have pulled up carpets and
strips of the floor have come up with it!

Grumble