Take that if you can with you to the /a local furnace/wood stove/pottery supply.
They can likely match the fittings(ceramic) and always replace the coil.
Tell them what you do - what temps - and that will help them pick the proper
metal. Kanthal is the likely best for you.

I've done this with large pottery kilns - measured the troughts to lay the coils in -

Martin
Martin Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
NRA LOH, NRA Life
NRA Second Amendment Task Force Charter Founder



gtslabs wrote:
I tring to find a replacement heating element for a heat treat furnace.
The temp is 2300*F 240V 40 Amp Single Phase.
Here is a photo of the setup. There is no manufacturer name on the
furnace but the controller is Barber Colman Controller Model 293C

http://www.premiermotorsports.net/element.jpg
Thanks
Steve


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----