Ok, i finally got this bi-metal defrost to clip on it's original
position, i have to force it very hard to get it in, without breAKING
THE CLIP.
i am wondering if the bi-metal defrost may have been shorted or not, i
did not test with a meter. in any case, i am very surprise, on the
cramp pig tail wire connectors, there was no sealer, or tape to block
moistures, water from getting into the wires... don't know this is by
design or a flaw. i sealed the whole wire connector with electrical
tape just in case. water and electric don't mix..

g.