Right on, Fred! AFAIK there is no 2-part epoxy that can stick painted
surfaces together and then be a cleaned off without a trace and/or damage to
the paint. Please let us know if you find some, though. For your intended
purpose I would try one of the "5-minute" epoxies and experiment with making
the pull before the epoxy was fully cured. It might be possible to remove
the partial cure with alcohol or some other solvent which doesn't attack
painted surfaces.

Bob Swinney
"Fred" wrote in message
...

I need at least 10-15 PSI pulling power without
the "stuff" letting go from the surface. In other words, plenty of
stick...



It depends on the epoxy - some works great and others don't. 15 psi is
nothing if the correct type of epoxy is used. Could be a PITA to clean up
since epoxy sticks so well - the good thing about it is it dries clear or
slightly yellow.