On Tue, 09 Aug 2005 18:59:46 GMT, "amx" wrote:

Sometimes when i pressed the trigger on the air impact wrench it would just
let air out and do nothing else and when it did work it would undo anything
above 40ft lbs i took it apart to see if i could see what was wrong but now
it doesnt work at all just lets the air out when i press the trigger all the
time


Also, your air source may have a restriciton in your hose or feed
line.

Even though you have a 100psi showing on your guage, a restriction
can bleed down the effective pressure to 30psi as measured at the
drill turbine.