"Dave" wrote in message
...
Having just discovered that I've cocked-up, I'll expose my error in the
hope that someone is saved from doing the same thing.
I'm just refitting the kitchen and set the carcass tops at the standard
height recommended by the supplier of the carcasses (Homebase). Everything
was fine until today when I installed the dishwasher (which only just
fitted under the worktop); as I was doing this a little light glimmered
between the ears - what about the flooring?
You'll have guessed by now - once the flooring is down it's not going to
be possible to get the dishwasher out!
I suppose I could remove the worktops, plumbing and hob so I can get to
the screws fixing the carcasses to the walls and then adjust all the
carcass legs, but my inclination at the moment is to leave it and deal
with it if the dishwasher fails before we move house - it's new so the
odds might be in my favour ;-)

On a related note: the Homebase carcasses are pretty poor quality and I
wouldn't recommend them; the doors and "luxury drawers" are excellent
though.

Dave

You are not the first - I was called out to a friends DW, fortunatly it was
a programmer fault which I was able to change from the front:-) There was no
way the DW was coming out without destroying the worktop or the laminate
floor.

Peter