On Sun, 31 Jul 2005 07:09:08 -0500, "Chris
wrote:
I will go ahead with the zone valve as I do have one. There are a pair of free contacts in the zone valve that can be used to switch the pump on when the valve is open
Good point on using the aux contacts - that is the right way and in a
more conventional design they are used to give the demand signal to
the boiler and indirectly the pump; this all happening once the valve
has opened.
Another thing that you could perhaps do is to fit a cylinder
thermostat on the FIRE cylinder and use that to open the valve....
--
..andy
To email, substitute .nospam with .gl
|