also check out the step drill bits - real slick - and expensive too. makes
short work of hole making.

"DoN. Nichols" wrote in message
...
In article k.net,
Rick wrote:

Ig's concept of a "big hole' is a little different than ours : )

By the time you drill the pilot for a Greenlee, you're almost 1/2"!

But a Greenlee punch is available to punch the 15/32" hole with
a key tab to keep the switch from rotating in the hole.

And a 15/32" Greenlee chassis punch without the key would use
about a 3/8" drivescrew, IIRC.

Enjoy,
DoN.

--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---