Soyo SY-P4I 845PE motherboard 3 ISA slots from barber.com email for
price.

CPU Support:
Intel Pentium 4 up to 3.06 GHz and Celeron up to 2.0 GHz
Chipset:
Intel i845PE
FSB:
Supports 533/400 MHz FSB
System Memory:
DDR 333/266 184-pin PC2700/PC2100 non-ECC,
unbuffered DDR SDRAM
Two 184-pin DDR SDRAM 2.5V DIMM sockets support
up to 2GB
Expansion Slots:
1 AGP slot 2x/4x
4 PCI slots
3 ISA slots
On Board Audio:
On board 4 channels AC97 Codec audio solution
On Board LAN:
Intel® 82540EM Gigabit Ethernet controller
On Board IDE:
Ultra DMA 66/100
Two independent channels for four IDE devices
Supports up to PIO Mode 5 and UDMA 66/100
Two PCI bus mastering ATA E-IDE ports
I/O INTERFACE:
Two RS-232 serial ports (16550 UART compatible)
One parallel printer port (SPP/EPP/ECP mode)
One FDD port (Supports 3 mode, 1.2/1.44/2.88 MB FDD
Provides IrDA / FIR ports with optional cable for transceiver
Provides 6 USB 2.0 ports (2*rear, 4*pin header)
I/O Connectors:
PS/2 Mini-DIN mouse & keyboard ports One RJ45 connector
Two USB ports
One D-Sub 9-pin male serial ports (one by pin header)
One D-Sub 25-pin female printer port
Audio I/O: LINE-Outx1 , LINE-Inx1, MIC JACK x1
One game port


Hugh



"Karl Townsend" remove .NOT to reply wrote
in message ink.net...
For the third time in six months, the PC running my CNC mill has broke.
First time, the hard disk fried. Second time, CPU cooling fan quit.

This time the computer won't try to boot to any drive. No messages at all
from POST on the monitor. For that matter no text at all. Power supply
cooling fan comes on, CPU cooling fan on, strange sound from a drive
(can't
really tell which one). I need an ISA slot, or I'd just buy another box
and
be done with it. Any suggestions?

Karl