Duane Bozarth wrote:

blueman wrote:

"Rumpty" writes:
IF you want to use the two 1/2" plys, rout out matching 1/8" wide groves
1/4" deep in each ply sheet, epoxy in a 1/8' X 1/2" steel strip into the
groves and glue up. This won't sag.

He's putting it on edge--the strong dimension. For this to work well
you will have to have the depth of the grooves at pretty close
tolerances.

Actually, using epoxy to seat the steel should eliminate this concern,
shouldn't it?
--
Alex -- Replace "nospam" with "mail" to reply by email. Checked infrequently.