This outfit makes tires
http://www.carterproducts.com/produc...id=6&cat_id=15

plus just about every kind of bandsaw accessory you could think of.

Randy



"MM" wrote in message
. ..
Boris,

I use this stuff to repair bandsaw wheel tires. Works great, and lasts
long.


http://www.fennerindustrial.com/prod...ind.html#80_85

The downside is you need a special tool to weld the ends. It's really not
much more than a soldering iron with a flat copper element, and a spring
loaded widget that slams the two melted ends together after the blade is
pulled out.

Mark



"Boris Beizer" wrote in message
link.net...
I have an old Craftsman (made by King-Seely) bandsaw which I converted
to
metal working by means of a counter shaft arrangement. It is a
three-wheel
saw. The wheels are 6" in diameter and the tire width is 3/4". I need
replacement tires. I've looked (google, etc.) but can't find any source
of
rubber/polyurethane/what-not flat belting to use as tires or bandsaw
tires
that small. Anybody know of a source?

Boris

--

-------------------------------------
Boris Beizer Ph.D. Seminars and Consulting
1232 Glenbrook Road on Software Testing and
Huntingdon Valley, PA 19006 Quality Assurance

TEL: 215-572-5580
FAX: 215-886-0144
Email bsquare "at" sprintmail.com

------------------------------------------