View Single Post
  #2   Report Post  
Pat Ziegler
 
Posts: n/a
Default


"Mike Rothe" wrote in message
news:2%qze.1900437$6l.559334@pd7tw2no...
You could try using an isolation transformer (110V to 110V) this would

not deliver a greater amperage than what the breaker is rated for, but may
solve a GFI problem. I have heard of a device that indoor grow ops are
using now to prevent brown outs in their neighborhoods when their lights
turn on. I'm not sure exactly what it is, but I believe what it does is
somehow draws power from a few AC cycles then slowly increases the number of
cycles it draws from until it is running at the full 60 Hz (I think),
another thing you could do (maybe) is connect to a second outlet in another
lot, I would think that each trailer is on it's own breaker (BE VERY CAREFUL
doing this as you may end up crossing hots, or even worse if the plug in the
park is wired wrong you could pump 220V into your system!). I'm pretty sure
that all capacitors would do is shift the AC phase, maybe a UPS might solve
the problem.

Hello All,

We have a converted bus and when we travel we mostly plug into regular

15
to
20 amp outdoor GFI outlets. We have a few lights, RV frig, few heaters,

bat
chargers, etc and this almost always blows the breaker at the outlet we

are
plugged into.

Does anyone know of any products or perhaps someone can help me make
something using high power capacitors that will deliver greater amperage

for
our bus while only drawing up to 15-20 amps from the source?

Thanks In Advance!




--------------= Posted using GrabIt =----------------
------= Binary Usenet downloading made easy =---------
-= Get GrabIt for free from http://www.shemes.com/ =-



Are you blowing the breaker or tripping the GFI?

If you are tripping the GFI you might have a problem with one of your
appliances and that needs to be fixed before some gets hurt. Unplug
everthing, connect to the GFI outlet. If all is well then start plugging
in the appliances one at a time to see which one trips the GFI. Then have
that one checked out by a tech.

If you are blowing breakers then you are drawing too much current. You'll
have to shed some load or at least manage it. don't use the hair dryer and
the TV at the same time or whatever.

Pat Ziegler

Wholesale Electronics Inc.

www.weisd.com