Thread: flattening yard
View Single Post
  #3   Report Post  
Steve K
 
Posts: n/a
Default

In article ,
"Mark" wrote:

Actually, there is a bank at the low end of that yard. Overgrown with
sumac, thorns, etc., basically unusable. So I just pictured the dirt
being pushed over this bank and falling where it may. Sadly creating a
steeper bank.

Because of this, I pictured having to put some sort of fence on that end
of the new flat yard. As it will be pretty steep for a few feet. The top
end may need a retaining wall.

No utilities, but there may be an underground spring that could be
uncovered.

Will it be safe? How high will the retaining walls be at each end. I'm
assuming you will need them to avoid cave-ins. Will it effect your resale
value. Any buried utilities you will dig up or cover up on either end?



"Steve K" wrote in message
...
Hi,

My wife and I bought a house back in 1996. We had no kids. We then had
two kids, boy and girl. Now they are 7 and 5, the boy loves baseball and
football.

But our yard is quite sloped. There is no flat spot anywhere to play.
Except for the spot designated for our future garage (we had MANY loads
of fill brought in over a two year period to just get enough of an area
to build a garage on). I know it's hard for you to picture how sloped
our yard is but it's maybe 20 or 30 degrees. ??

One area of our yard that has no trees, it's just grass, is where they
play now. But being that it is sloped it's hard to play anything, you
hit a baseball and it rolls to the bottom of the hill. No fun.

This area is about 50 yards long by 25 yards wide. Give or take a few
yards. If I stand at the bottom of the hill, the top of the hill is
maybe 6 or 7 feet above my head.

Are my wife and I nuts for even thinking about hiring a guy with a big
bulldozer to come in and take half of the high part of the hill and push
it to "fill in" the lower part of the hill, therefore flattening it out?

We're even thinking of moving. But we really love the house and area and
would rather not move.

Any thoughts?

Thanks
Steve