L. Kotney:
You will need to do an even "closer examination"....
...... faulty parts many times will not look obviously bad.... dust off your
multi-meter and do some troubleshooting and testing..... verify that the
flyback derived B+ is making it to the vertical deflection output circuitry.
Problem could be a bad output device, shorted electrolytics, open resistors,
shorted diodes, faulty or cracked solder connections, etc.
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


"L. Kotney" wrote in message

this set and there is no obvious cause to the problem
from a close examination.
o