When I make something I generally work out the finished dimensions I
want then make rough sketches of the components. I draw terribly and
would kind of like a CAD program that works in a similar manner. For
example...

1. Define components (top, bottom, sides, back, front, whatever).

2. Define relationships of components ("top" = "parallel to bottom", for
example), preferably by drag & drop.

3. Draw components by inputing dimensions.

4. View/modify each component as a separate dimensioned drawing

5. View all components in relationship to the others; eg, an "unfolded"
and dimensioned view (front in center, top above, bottom below, sides at
respective sides)

6. Put the lot together in a dimensioned 3D view.

Basically, I don't want a program to actually draw the stuff but one
that takes numeric input and creates them from that. Any suggestions?

--
dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico