gfulton wrote:
"Ashton Crusher" wrote in message
...

On Wed, 22 Jun 2005 11:15:31 -0400, "Al Reid"
wrote:


"Doug Miller" wrote in message

. ..

In article , "Al Reid"

wrote:

"dean" wrote in message
glegroups.com...

Because every professional user I have ever seen is using 10W30

engine

oil. Now I'm not about to put that into my Stihls but I was just
wondering if I am wasting money on expensive bar oil?

Any comments?

I put used motor oil in my saw. Good way to get rig of it.


No, not really.

The suspended solids and other junk (such as combustion byproducts) in

used

motor oil don't do either the bar or the chain any good. That gunk is

better

off being recycled and disposed of properly.

--
Regards,
Doug Miller (alphageek at milmac dot com)

Nobody ever left footprints in the sands of time by sitting on his

butt.

And who wants to leave buttprints in the sands of time?

Doug,

I have never actually put used motor oil in my saws, although I have been

told that it can be done. I was just testing a theory

that if I said I did that Doug Miller would be the first one to tell me

that I was wrong to do so.

Theory proven correct ;^)


Actually, that seems like a pretty good use for it. The claim that
'it doesn't do the bar any good" is probably true but OTOH it is very
unlikely to do it any harm either. After all, it was being used up
until it was drained to lubricate a far more complicated and delicate
mechanical system (your car) with no ill effects. To think that it
was good enough for your car up till then, but inadequate for the task
of lubing the chain and bar is silly. And it's an equally silly
suggestion that someone is doing the world a favor to recycle it
instead because that means you will be using BRAND NEW oil instead of
that used oil - clearly a net loss to the world of limited oil.



Thank you for injecting some sanity into this discussion.

Garrett Fulton




I agree, excellent logic. But, remember, no good deed goes unpunished.



AL