View Single Post
  #4   Report Post  
PrecisionMachinisT
 
Posts: n/a
Default


"DeepDiver" wrote in message
...
"Q" wrote in message
...
I got my hands on about 10 gallons of Texaco Meropa 220 Industrial gear

oil
( atleast thats what the label says ).. Its smelly and brownish, so I
doubt
SWMBO would appreciate me using it on the door hinges etc, so what do I
use
it for ?....

Would this work on the manual gearbox in my 1997 Toyota Hiace van ?.. It
has
run about 160.000 miles w. the same oil in it ( I change the oil on the
engine on a regular basis, but not on the gear box )



Don't you just love it when people get something free or cheap and then
decide to risk wasting or destroying hundreds or thousands of dollars of
labor or machinery (in this case, a transmission) just so they can find a
use for their "bargain"?

Sure, go ahead and ignore your vehicle's service specifications (both
service intervals and oil specifications). It's quite clear you know more
than the collective engineering expertise of Toyota Corporation.


Or do I just burn it ?


Now there's another great idea. It's makes much more sense to fill our air
with billowing clouds of toxic black smoke than to give the oil to someone
who can actually use it or to recycle it.



http://www.fammllc.com/famm/lubrican...ils&&Meropa220

===

MEROPA lubricants are recommended for all heavy duty enclosed gear drives
containing spur gears, helical gears, and bevel gears as well as spiral
bevel gears, hypoid gears, and worm gears, including those operating at high
speeds or very high loads. MEROPA lubricants can also be used for chain
drives, sprockets, plain and anti-friction bearings, guide ways and flexible
couplings where service conditions require the use of either a mild EP or an
EP-type gear lubricant. MEROPA lubricants have been formulated to meet the
most severe service requirements of gear drive manufacturers. MEROPA 68 to
320 meet the US steel 224 specification and the 68 to 680 grades meet the
David Brown ET 33/80 specification. MEROPA also meets DIN 51517/3 and AGMA
250.04 as well as Cincinatti Milacron P35, P59, P63, P74, P77 and P78.

===

Sounds like it might also be a good chainsaw bar oil to me, probly is
thicker than molasses.

--

SVL