View Single Post
  #4   Report Post  
Sam Goldwasser
 
Posts: n/a
Default

"Art" writes:

Properly operating the risk is minimal, there are protect circuts within the
set which protect from over voltage and over current which, in design, shut
down the set.


Also keep in mind that the same warnings are on 1/2 inch camcorder
viewfinder CRTs.

And, as noted, the plastic won't block the X-rays so it's not much different
than with the back on.

--- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header above is
ignored unless my full name is included in the subject line. Or, you can
contact me via the Feedback Form in the FAQs.