I assume that you are meaning that you have 10vpp wave with 10vdc offset.
The answer is the latter, but the terminology that you are using is
incorrect. It is not all dc. It IS a varying current with a dc component.
The impedance must account for all factors.

Leonard

wrote in message
ups.com...
2 questions about a fully DC Sine Wave....let's suppose you have a DC
Sine wave which varies from +5V to +15V peak-to-peak going into a load
with R, L, and C components.....

Question #1:
Is the load's impedance a function of R, L, and C (and wave frequency)
or is it simply just R (i.e. Z=R)? In other words does non-resistive
impedance (L + C) really only matter with an AC signal OR anytime
voltage varies periodically (even if it is all DC)?


Question #2:
Would a "regular" negative peak detector ciruit, like shown he


http://www.elektroda.net/cir/index/D...CTOR.htmgative


work for the DC Wave described? Will it output +5V or do negative peak
detectors only work for AC signals?

Thank you.