G'day Dave,
I'm with you on that one. I have done it myself, that's replace melamine
or laminate edging with cabinets still fixed in position, but I sure can
think of a lot more pleasant things to do.
All the best
John

David wrote:
I agree with everything you've stated here with one notable exception.
One, given sufficient need, can always re-do the edge banding. With the
cabinets remaining affixed to the wall, no less. Not that I've had a
need, but it's quite doable.

Dave

John B wrote:



G'day John,


In a workshop environment there is NO WAY I'd use melamine edge strips
to cover the ends as these will invariably chip and look tatty after a
period. If you do not wish to edge with timber my next recommendation
is painted edges as these can be touched up in the event of them
becoming damages or better still a spirit based wood stain which will
strike deep into the timber and a couple of coats of finish on the top.
Hope this helps
regards
John