"Jerry Built" ] wrote in message
news:LVLUOIP5L0LWINCBCNIIIPF0EOONJSIJMIEKIAGC@zipl ip.com...
Peter Taylor wrote:
"jacob" wrote...
Putting up plasterboard:
What's the point of Screwfix 'plasterboard- jagged'' nails as
compared to galvanised clout nails, and how far apart should
they be?
snip
But I agree with Andrew - use drywall screws if you can - 32mm
for 9mm plasterboard and 38mm for 12mm board.
This is OK but there can still be big problems with inept fitting,
especially where too few screws are used and/or they are over-
driven and the heads break through the outer layer into the
plaster; this can lead to whole boards falling off!!
Do people think that adapters like this;
http://tinyurl.com/3yc6n
would be of any use with an ordinary cordless driver?
Mark