"The Natural Philosopher" wrote in message
Although I accept that for professional tiles doing large areas score
and
snap will work, and is faster...

(i) it leaves a sharp edge wich I always sand off anyway.

With just a light score you get a perfect edge, which is of course sharp.
Normally hidden by grout anyway.

(ii) It can't do corner cuts, and nibbling always breaks more tiles than
the tile saw.
(iii) it can't do curves, whereas with ingenuity, a tile saw can produce
remarkably goood curves to fit round pipes etc.
(iv) currently a tile saw is as cheap as a decent score and snap system,
and will actually last LONGER than a cheap one.

(v) Score and snap will not reliably prooduce tile sections less than
about 30mm wide
..
If you're on your last box of tiles, this is true. If you've got loads
left
over, it'll snap off 15mm :-)

(vi) For an amateur, a tiles saw will probabkly result in less wastage
of
expensive tiles.

Can't disagree with the above, but the proportion of difficult cuts to
straight is pretty small. One course of tiles round a bathroom could
easily
mean 70-80 straight cuts. You really need both tools


--
I am using the free version of SPAMfighter for private users.
It has removed 5150 spam emails to date.
Paying users do not have this message in their emails.
Try www.SPAMfighter.com for free now!