SteveB wrote:

wrote in message
...

Oil rigs seem to be capable of drilling holes inches in diameter
and thousands of feet deep. They can keep these holes amazingly
straight or deliberately curve them.

How do they do this and what does the drill head look like?

Jim


Oilwells are drilled with predetermined goals in mind. The target strata is
not always right under the oil rig. Hence, they use "directional drilling"
to make the bit go in the direction they want it to. That way, they can
puncture several levels of strata with one well to recover as much oil as
they can.

Directional drilling is achieved in many ways. It is far to complicated to
explain here in a few paragraphs. Google it and read away. Basically, it
is just a way to change the direction of a bit to hit a known reserve.
Modern advances allow drillers to make sharper turns. A drillstem is made
of steel, but anything thousands of feet long has flex in it.

Drill bits come in hundreds of sizes and configurations. Some have no
rolling bits on them. Others have rolling cutting wheels on them like the
ones you see on mining equipment. They come in all sizes.

Hughes Tools was innovative in the oil industry. NO ONE could purchase a
Hughes Tool Bit. You could only rent them. That way, there was absolutely
no question as to ownership. When one went dull or was damaged or lost, you
got another.

Google for oilwell drill bits, and read on.

Steve


Yep - not only can the drills be controlled, but they can be driven down riverbeds that
are thousands of feet below and running in a dip or strike or both directions.

In other words, If California wasn't so picky and not in my back yard after I moved here -
A rig in an inland valley could be drilling the oil in the oil beds off the coast.

In West Texas they found that many of the wells were taping into sand lanes or river beds
of long ago flooding waters. The well either side would be dry. Schlumberger discovered
this (IIRC) and how to gather the oil down stream and not using verticle holes.

Slant drilling was once against the law. Now it saves a lot of time, money and pollution.
Slant is the old way of diagonal or slant drilling into a neighbors pool that you can't
hit going verticle.

Martin [ former SLB ]

--
Martin Eastburn
@ home at Lion's Lair with our computer lionslair at consolidated dot net
NRA LOH, NRA Life
NRA Second Amendment Task Force Charter Founder

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----