"Peter Taylor" wrote in message
...
"jacob" wrote in message
om...
Putting up plasterboard:
What's the point of Screwfix 'plasterboard- jagged'' nails as
compared to galvanised clout nails, and how far apart should they be?

cheers

Jacob

Clout nails have a large flat head, used for nailing roofing felt. The
problem
about using them for plasterboard is that the skim coat of plaster doesn't
adhere to the large head and usually falls off leaving a hole - proper
plasterboard nails have much smaller heads. But I agree with Andrew - use
drywall screws if you can - 32mm for 9mm plasterboard and 38mm for 12mm
board.
It's also much quicker and easier, especially if you're working alone.


Although it can be frustrating when you rip the heads off :-(

Then again, I was screwing through lats, having removed the old plaster,
instead of straight into joists.

Screws are easier than nails, expecially if you have a cordless
drill/screwdriver.

HTH
Dave R