Thanks for the tip....I'm trying to remove the agitator now but do not
see any screws on the outside of the agitator. There is only one a
1/8" hole at the bottom of one side of it but I felt with a small
eyeglass screwdriver and could not find any screw. Is there a
particular screwdriver that I need to get to remove the screw with?

Thanks,
Nick

On Sun, 1 May 2005 18:16:17 -0400, wrote:

the seal it the top of the shaft that the agitator sits on is bad.water
is gettin in,floating out grease from the transmission. you can replace
the seal but you also need to clean out the trans and repack it. many
times the trans wears alot with the water in it, so a new washer is best
unluss you cn do the work yourself. lucas